Barksdale巴士德 6900、6940系列 高压OEM阀
Barksdale巴士德 6900、6940系列 高压OEM阀 Series 6900, 6940 High Pressure OEM Valves
Series 6900, 6940 High Pressure OEM Valves
Barksdale巴士德 阀门Valves
Barksdale的高压OEM阀门系列可在严苛的工业应用中为高达3000 psi的流体提供出色的方向控制。使用Barksdale的Shear-Seal?技术,OEM阀门产品即使在被污染的介质污染了会破坏普通阀门的碎屑的情况下,仍可提供可靠的性能和长寿命。
Barksdale's High Pressure OEM Valve line provides exceptional directional control for fluids up to 3000 psi in the toughest industrial applications. Using Barksdale's Shear-Seal? technology the OEM Valve products offer dependable performance and long life even when the media being controlled is contaminated with debris that would ruin ordinary valves.
该OEM线“封闭式中心机械手”(也称为“浮动中心”)内置有不同的流量模式,在该位置中,压力端口被阻塞,气缸端口通向回油口。其他型号的特征为“开放式中心机械手”,也称为“开放式中心”,其特征是带有压力端口的流型,气缸端口通向返回端口。
Different flow patterns are built into this OEM line the "Closed Center-Manipulator", also known as "Float Center", where in the center position the pressure port is blocked and the cylinder ports are open to the return port. Other models features "Open Center-Manipulator" also known as "Open Center" features a flow pattern with the pressure port, cylinder ports open to the return port.
6900、6940系列 高压OEM阀
Series 6900, 6940 High Pressure OEM Valves
![](pic/6900-40-pgEmjpfb.jpg)
Barksdale 6900、6940系列 高压OEM阀 资料下载
Series 6900, 6940 High Pressure OEM Valves
6900、6940系列 高压OEM阀
High Pressure OEM Valve line up to 3000 psi
Shear-Seal Manual Control Valve
Applications
Hydraulic presses
Military equipment
Paper mill controls
Pipe forming
Railroad maintenance equipment
Datasheets
Series 6900, 6940 Datasheet
Valves Supplemental Guide
Details
高压OEM阀门线高达3000 psi
Shear-Seal手动控制阀
应用领域
液压机
军事装备
造纸厂控制
管道成型
铁路维修设备
数据表
6900和6940系列数据表
阀门补充指南
细节
描述Description
Barksdale的高压OEM阀门系列可在严苛的工业应用中为高达3000 psi的流体提供出色的方向控制。使用Barksdale的Shear-Seal?技术,OEM阀门产品即使在被污染的介质污染了会破坏普通阀门的碎屑的情况下,仍可提供可靠的性能和长寿命。
Barksdale's High Pressure OEM Valve line provides exceptional directional control for fluids up to 3000 psi in the toughest industrial applications. Using Barksdale's Shear-Seal? technology the OEM Valve products offer dependable performance and long life even when the media being controlled is contaminated with debris that would ruin ordinary valves.
该OEM线“封闭式中心机械手”(也称为“浮动中心”)内置有不同的流量模式,在该位置中,压力端口被阻塞,气缸端口通向回油口。其他型号的特征为“开放式中心机械手”,也称为“开放式中心”,其特征是带有压力端口的流型,气缸端口通向返回端口。
Different flow patterns are built into this OEM line the "Closed Center-Manipulator", also known as "Float Center", where in the center position the pressure port is blocked and the cylinder ports are open to the return port. Other models features "Open Center-Manipulator" also known as "Open Center" features a flow pattern with the pressure port, cylinder ports open to the return port.
特征Features
- 独特的Shear-Seal技术Original Shear-Seal technology
- 低压降Low pressure drop
- 耐污染Tolerates contaminates
- 弹簧复位选项Spring return option
- OEM设计的特殊流型Special flow pattern for OEM designs
技术指标
一般规格*
工作压力: |
液压油高达3000 psi(206 bar) |
流量,Cv: |
见表 |
背压: |
回油口的压力不得超过250 psi(17.2 Bar) |
压力下降: |
14 psi(0.96 bar)在20英尺/秒的情况下,请参阅《补充指南》以获取更多详细信息 |
耐压: |
工作压力的1-1 / 2倍,但回油口除外 |
爆破压力: |
除了回油口(3000 psi [206 bar])外,工作压力为2-1 / 2倍 |
介质温度范围: |
-40°至+ 250°F(-40°至+ 121°C) |
湿材料:
转子:
压力密封:
轴:
阀体壳体:
轴承:
标准O型圈: 支承
圈: |
硬质阳极氧化铝
黄铜
不锈钢
阳极氧化铝
碳素钢
Buna N,其他可用
Teflon? |
|
*有关其他选项,请参阅产品配置器。 |
|